Does the substation have radiation and what is the safe distance?
Release time:
2022-03-30
Source:
Author:
Substations do not generate electromagnetic radiation, but electromagnetic induction. 110kv substation safety distance is 15 meters (front) and 12 meters side).
The state's "Measures for the Administration of Electromagnetic Radiation" stipulates that projects above 100 kV are strong electromagnetic radiation projects. Article 20 stipulates that: around the concentrated use of large-scale electromagnetic radiation equipment or high-frequency equipment, according to the requirements of environmental protection and urban planning, in the planning restricted area Sensitive buildings such as residential houses and kindergartens are not allowed to be built inside.
At present, the distance between equipment and buildings is required. For 10KV-35KV substations, the front is required to be more than 12 meters away from residential buildings and the side is more than 8 meters; the construction of substations above 35KV requires that the front is more than 15 meters away from residential buildings and the side is more than 12 meters. ; Box-type substations are more than 5 meters away from residential buildings.
Relevant Information
Inspection requirements for substations
The patrol inspection of the substation is to observe whether the appearance of the equipment is abnormal through regular inspections, such as whether the color has changed, whether there is any debris, whether the pointer indicates normal, whether the sound of the equipment is normal, whether there is any abnormal smell, and the touch is allowed. Check whether the temperature of the equipment is normal, and measure the changes in the operating parameters of the electrical equipment during operation, etc., to determine whether the operating status of the equipment is normal.
2022-03-30
An article to understand what is a substation
A substation is actually a hub for voltage conversion, but it is not as simple as a single transformer. It mainly converts high voltage into low voltage, or converts low voltage into high voltage, so as to achieve the purpose of converting voltage and transmitting voltage.
2022-03-30
Why is it necessary to install noise controllers for transformers?
The sound of the transformer needs to be controlled, especially for the place where the transformer generates noise. Because the installation range of the transformer is relatively wide, the various uses of the transformer are relatively popular, and sometimes the installation position of the transformer is not correct. , bringing inconvenience to many residents and communities. At this time, the noise of the transformer must be controlled. Installing a controller for the noise of the transformer can solve this problem. How is the noise controller installed for the transformer?
2022-03-30
Substation inspection points 1: substation and distribution room and fence, channel
Substation inspection points 1: substation and distribution room and fence, channel Due to work, power supply production inspections are often carried out, and most of our contacts are 66kV substations. Then, in the inspection, what needs to be checked in the power distribution room, passage, and fence?
2022-03-30
Links:
Contact
Address: North Section of Longteng Road, High-tech Development Zone, Tai'an City, Shandong Province
Service hotline: 0086-538-6611222
Sales phone: 0086-538-893268
Website: https://www.elolam.com.cn
Email: elolam@126.com
